Contact Us

CELLULOSE TECHNOLOGIES
R-8/2 F2, RAJNAGAR,
GHAZIABAD-201002
U.P, INDIA
MOBILE: +91-98 11 93 9017
FIXED PHONE: +91-120-6401446
Visit us on: www.ctindia.net
Email us on: src@ctindia.net

Packaging Testing Facilities

Paper, Paperboard, Corrugated Box, Folding cartons

  • Grammage
  • Caliper (Thickness)
  • Bursting Strength
  • Burst Factor / Burst Index
  • Breaking Length
  • Tensile Strength / Index and % Elongation
  • Moisture Content
  • Cobb test
  • Smoothness
  • Porosity
  • Ring Crush Test
  • Scuff Proofness
  • Sulphide content
  • Chloride Content
  • Brightness
  • Gloss
  • Opacity
  • Fibre analysis
  • PH Value
  • Surface pH
  • Tear Resistance
  • Tear Factor / Index
  • Wax pick-up no.
  • Stiffness
  • Ash content
  • Individual grammage 3ply CFB Sheet 5ply CFB Sheet 7ply CFB Sheet
  • Compression Test

Plastic Film / Flexible Laminates / Pouch:

  • Caliper ( Thickness)
  • Tensile Strength & % Elongation
  • Melt Flow Index ( Plastic Resins Only)
  • Thermal Analysis (DSC)
  • Identification of Polymeric Substrate ( Chemical Method)
  • Water Vapour Transmission Rate ( Cup Method)
  • Mocon Method
  • Oxygen Transmission Rate (Mocom)
  • Co-efficient of friction
  • Tear Resistance
  • Food Grade ( Extractability Study)
  • Treatability ( Surface tension)
  • Heat Shrinkage
  • Heat Seal Strength
  • Peel bond strength ( One contact layer)
  • Gelbo flex resistance
  • Odour Pick-up test

Transport worthy Test : Filled Container

  • Compression strength
  • Stack load test
  • Drop test
  • Vibration test

Glass / Metal / Wooden / Jute / Ancillary Packaging Materials

  • Dimension
  • Hydraulic Pressure test
  • Tin coating
  • Lateral compression strength
  • Breaking Strength
  • Seam Strength
  • Adhesion strength to steel

We can conduct packaging testing procedures for your daily material incoming from various supplers.

As after generation of specification, incoming material can be checked by following test under alloted tolerance value for correct procurement:

  1. B.S
  2. Compression
  3. ECT
  4. RCT
  5. Moisture & Cobb
  6. MFI
  7. Dart
  8. Gauze
  9. grammage
  10. B.F

Substandard Material Can Be Exepted Under Tolerance Values By Penalizing Supplier Against Lot Payment. Procurement Would Be More Transparent Under Above Test Process.

Cause & Effects On Corrugated Box

Storage time under load:

Compression Loss

10days - 37 percent loss

30 days - 40 percent loss

90 days - 45 percent loss

180 days - 50 percent loss

Relative humidity, under load (cyclical RH variation further increase compressive loss):

50 days - 0 percent loss

60 days - 10 percent loss

70 days - 20 percent loss

80 days - 32 percent loss

90 days - 52 percent loss

100 days - 85 percent loss

Pallet Patterns Columnar, aligned Columnar, misaligned Interlocked Overhang

0 percent loss

10 - 15 percent loss

40 - 60 percent loss

20 - 40 percent loss